My char is in open water but cannot sail north, or NNE. (haven't tried other northerly directions) . "Ship stops because it reached a coast."
But there is no coast *that* close.
Ship sttuck.
Moderators: Public Relations Department, Players Department, Programming Department
-
tiddy ogg
- Posts: 1402
- Joined: Sun Oct 02, 2005 8:53 pm
- Location: Southampton, England
- Contact:
Ship sttuck.
Last edited by tiddy ogg on Wed Mar 21, 2007 1:10 pm, edited 2 times in total.
- Chris Johnson
- Posts: 2903
- Joined: Wed Dec 01, 2004 3:26 pm
- Location: East Sussex, United Kingdom
- Contact:
-
tiddy ogg
- Posts: 1402
- Joined: Sun Oct 02, 2005 8:53 pm
- Location: Southampton, England
- Contact:
The coast is to the west, running almost north-south.
Trying to sail at 20deg ie, NNE, gave the error, "stops because reached coast".
Went at 90 deg for 1 tick and tried again at 20 with same result.
So, went dir 315 at half speed, (which came out at 48% although I'd input 50%,) OK for one tick.
Next I tried 15 deg at 48% speed and that seems OK after one tick.
Confused...
Trying to sail at 20deg ie, NNE, gave the error, "stops because reached coast".
Went at 90 deg for 1 tick and tried again at 20 with same result.
So, went dir 315 at half speed, (which came out at 48% although I'd input 50%,) OK for one tick.
Next I tried 15 deg at 48% speed and that seems OK after one tick.
Confused...
- Pie
- Posts: 3256
- Joined: Sun Jun 19, 2005 3:30 am
- Location: the headquarters of P.I.E.
-
tiddy ogg
- Posts: 1402
- Joined: Sun Oct 02, 2005 8:53 pm
- Location: Southampton, England
- Contact:
- formerly known as hf
- Posts: 4120
- Joined: Wed Aug 04, 2004 2:58 pm
- Location: UK
-
tiddy ogg
- Posts: 1402
- Joined: Sun Oct 02, 2005 8:53 pm
- Location: Southampton, England
- Contact:
Still having trouble with this. After my manoeuvres above I went on OK for a while then again got the "reached a coast" message erroneously. Being fairly close to my destination I hopped into my little boat attached to the big one and made a trip ashore.
Returning to the mother ship started off again, and I'm sur I proceeded at 48% speed, (which figure had earlier appeared when I'd selected half speed.) Ship moved OK this last tick, but it now says I'm going 100%!
Thse ship, with two boats docked to it, may be overloaded and is it possible that the max speed possible is 48% of the absolute max, and that's what's causing the problems?
Returning to the mother ship started off again, and I'm sur I proceeded at 48% speed, (which figure had earlier appeared when I'd selected half speed.) Ship moved OK this last tick, but it now says I'm going 100%!
Thse ship, with two boats docked to it, may be overloaded and is it possible that the max speed possible is 48% of the absolute max, and that's what's causing the problems?
- Chris Johnson
- Posts: 2903
- Joined: Wed Dec 01, 2004 3:26 pm
- Location: East Sussex, United Kingdom
- Contact:
Who is online
Users browsing this forum: No registered users and 1 guest
